PVC (White)

Fittings shall be injection molded from PVC Type I compound, cell classification 12454 in accordance with ASTM D 1784.

When cut and assembled in accordance with the manufacturer's instructions, in the range of angles shown below, fittings shall meet or exceed the requirements of ASTM D 2466 (schedule 40 PVC Fittings) and ASTM D2665 (DWV - Drain, Waste and Vent PVC Fittings).

ABS (Black)

Fittings shall be injection molded from black ABS compound in accordance with ASTM D2661 and CSA B181.1.

When cut and assembled in accordance with the manufacturer's instructions, in the range of angles shown below, fittings shall meet or exceed the requirements of ASTM D2661 (DWV - Drain, Waste and Vent ABS Fittings) and CSA B181.1.

Table

PVC (White)

ABS (Black)

Size

ASTM D2466 (Schedule 40)

ASTM D2665 (DWV)

ASTM D2661 CSA B181.1

1 1/2"

22 1/2o - 90o

11 1/4o - 90o

11 1/4o - 90o

2"

22 1/2o - 90o

11 1/4o - 90o

11 1/4o - 90o

3"

22 1/2o - 90o

15o - 90o

15o - 90o

4"

22 1/2o - 90o

17o - 90o

17o - 90o

 

 

All-Bend® is a registered trademark of Image Components, Inc. © 2013 Image Components, Inc. Philadelphia, PA.